LE Series is a heavy duty, tubular design keyed leverlock, engineered with a unique feature of maximum 45° rotation of the lever, which fully retracts the latch bolt, this offers the advantage of easy operation especially for the elderly or physically disabled. Other construction features offer faster, easier installation, dependability and security, available in a wide variety of finishes and functions. Made to comply with the requirement of “American with Disability Act (ADA Law)” and ANSI A156.2 Series 40000, Grade 2.
|Applications||• Heavy duty commercial, institutional, governmental buildings and other public accommondations or private entities as defined by the ADA law.|
|Door Thickness||• 1 3/8″ to 2″ thick wood or metal door.|
|Backset||• 2 3/4″ standard.|
|Latchbolt||• 1/2″ throw, UL listed, faceplate self-adjusted to accommondate beveled or flat doors.
• Faceplate sizes 2 1/4″ x 1 1/8″.
|Strike||• 2 3/4″ x 1 1/8″ with curved lip standard, ANSI 4 7/8″ x 1 1/8″ with curved lip optional.|
|Lever Length||• 5 3/8″ with maximum 1/2″ return, meets all fire and handicap codes.|
|Exopsed Trim||• Levers are zinc based plated to match BHMA finish designations, all other parts are made of brass, bronze or stainless steel.|
|Mechanism||• Heavy gauge cold rolled steel, hardened to reinforce strength, zinc plated and dichromated for rust resistance.|
|Door Preparation||• 2 1/8″ cross bore, 1″ edge bore. Mortise for anchors on both sides of 2 1/8″ bore hole and drill two 5/16″ dia. x 1/2″ deep holes on vertical center line for mountiong studs. (Stud bolts removable from lock if used on hollow metal door).|
|Finishes||• 605, 606, 612, 613, 625 and 626.|
|UL Listed ANSI/BHMA||• UL listed, 3-hour, 4′ x 8′ single swinging door .
• ANSI/BHMA A156.2, Series 4000 Grade 2.
I-TEK Metal Manufacturing Co., Ltd.
Copyright© 2019 – I-TEK Metal Manufacturing. All rights reserved.