Electrical Exit Devices
Certified A156.3-2014 Grade 1
Electrical Exit Devices and Trims are designed for new or retrofit installation into other manufacturers’ devices. Push Bar assembly’s smooth and reduced projection minimizes catch hazard. Device function is field selectable by adaptation with selected type of trim. A full complement of lever trim is available in wide range of architectural finishes.
Inherits from the excellent quality and performance of Klacci, the Electrical exit device is certified to meet ANSI/UL305 and the ANSI/BHMA A156.3-2014 Grade 1 cycle test requirement. Other than the already rigorous testing standard, the latch needs to withstand a 20 lbs weight loading to it in the cycle test to make sure it stays latched during any viciousness attempts. Devices and trims are also UL/cUL listed for panic hardware or fire-rated hardware. Electrical Exit device provides superior durability for high impact applications such as offices, schools, banks, assisted living facilities and other institutions or commercial buildings.
ELR provides the ability to remotely retract the latchbolt. Continuous duty solenoid can retract latchbolts under condition of unlatching or continually dogging.
Two internal switches are mounted into the device. One switch is designed to monitor Push Bar assembly. When there is unauthorized use of the device, the alarm will sound once the switch has been activated.
The alarm exit provides a simple way to audibly monitor the use of an exit device. The unit contains an alarm which is activated when the push bar is depressed.
The RX feature is used to signal the use of an opening. This device is equipped with one internal SPDT switch which monitors the push bar.
The LM feature is used to signal the use of an opening. This device is equipped with one internal SPDT switch which monitors the latchbolt.
The Delayed Egress Exit Device provides a controlled egress for openings which require panic or fire exit hardware for safe egress.
The Electric Mortise Exit Devices (E1400) can control entry to remote locking and unlocking the outside trim or an automatic fire alarm system.
Electrified trim with integrated lock/unlock option. Trim can be used for all 1000 Series models. Available as fail-secure or fail-safe.
The PS100 Power Supply is applicable for wide range of electrical products. It has an option to provide key to lock the enclosure.
