LE Series Tubular Lock

ANSI Grade 2 Heavy Duty

LE Series is a heavy duty, tubular design keyed leverlock, engineered with a unique feature of maximum 45° rotation of the lever, which fully retracts the latch bolt, this offers the advantage of easy operation especially for the elderly or physically disabled. Other construction features offer faster, easier installation, dependability and security, available in a wide variety of finishes and functions. Made to comply with the requirement of “American with Disability Act (ADA Law)” and ANSI A156.2 Series 40000, Grade 2.

Heavy duty commercial, institutional, governmental buildings and other public accommondations or private entities as defined by the ADA law.

認定/コンプライアンス	“A”ラベル(3時間)の単一スイングドア(4’x8′)にULがリストされています。 ANSI/BHMA A156.2 Series 4000 Grade 2.
ドア & 準備	2-1/8″ cross bore, 1″ edge bore. Mortise for anchors on both sides of 2-1/8″ bore hole and drill two 5/16″ dia. x 1/2″ deep holes on vertical center line for mountiong studs. (Stud bolts removable from lock if used on hollow metal door).
バックセット	標準2-3/4″ (70mm)。
ドアの厚さ	1-3/8″ (35mm) ~ 2″ (51mm) 木製または鉄製。
ラッチ	長さ1/2″ (12.5mm)、UL 認證、面板調節可。 Faceplate sizes 2-1/4″ × 1-1/8″ (57.2mm × 28.6mm)。
ドアの勝手	無方向性。
ストライク	2-3/4″ × 1-1/8″ (70mm × 28.6mm) with curved lip standard, ANSI 4-7/8″ × 1-1/4″ (123.8mm × 31.8mm) with curved lip optional.
Lever Length	5-3/8″ with maximum 1/2″ return, meets all fire and handicap codes.
Exopsed Trim	Levers are zinc based plated to match BHMA finish designations, all other parts are made of brass, bronze or stainless steel.
Mechanism	Heavy gauge cold rolled steel, hardened to reinforce strength, zinc plated and dichromated for rust resistance.