Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages
  • Klacci ANSI Grade 1 1000 Series Exit Devices

1000 Series Exit Devices

The Product

1000 Series Exit Devices and Trims are designed for new or retrofit installation into other manufacturers’ devices. Push Bar assembly’s smooth and reduced projection minimizes catch hazard. Device function is field selectable by adaptation with selected type of trim. A full complement of lever trim is available in wide range of architectural finishes.

The ANSI/BHMA A156.3-2014 Grade 1

Inherits from the excellent quality and performance of Klacci, the 1000 Series exit device is certified to meet ANSI/UL305 and the ANSI/BHMA A156.3-2014 Grade 1 cycle test requirement. Other than the already rigorous testing standard, the latch needs to withstand a 20 lbs weight loading to it in the cycle test to make sure it stays latched during any viciousness attempts. Devices and trims are also UL/cUL listed for panic hardware or fire-rated hardware. 1000 Series provides superior durability for high impact applications such as offices, schools, banks, assisted living facilities and other institutions or commercial buildings.

Security At-a-glance Classroom Security Solutions

Indicators provide the most direct visual assistance of the locked/unlocked status of the door during emergency events. The indicator window and message is designed to have status of the lock able to be seen clearly distance away within the inside of the room.

Now the 1000 Series Exit Device comes with the available indicator option on double keyed devices. Verifying the locked/unlocked status of critical main entrances or exits can be peace of mind.

Features

The 1000 Series Exit Devices are fabricated and blended with simplicity,
strength, durability, aesthetics and installer-friendly innovations.

  • Devices and trims are designed for new or retrofit installation into other manufacturers’ exit devices and trims.
  • Made to comply with the highest safety and security standards in industry.
  • UL/cUL listed for panic hardware or 3-hour fire rated exit hardware.
  • Certified to ANSI/UL305 and ANSI/BHMA A156.3-2014 Grade 1.

A Simple cylinder built in add-on kit.

B Special plastic inserts and rubber bumpers reduce noise and don’t fail under high or low temperatures. Impervious to petroleum lubricants.

C Detachable center case allows switching between mechanical and electrical options which replaces the need of buying two complete sets.

D Replaceable cam breaks at a predetermined load to prevent further damage of the trim mechanism. Handing change is simple and easy, just remove screw and cam from mechanism and rotate lever to desired position, then replace cam and fasten the screw.

E Stainless steel latch and deadlatching blade add perceived value.

F Center case with maximum versatility, Surface and concealed vertical rods can be adjusted inside the center case with an ingenious rod holder design.

G Double cylinder with indicator devices are used as classroom intruder locks, allowing the locking of the outside trim without opening the door.

H Integrated end cap reduced projection minimizes catch hazard and add stability to the push bar to move smoothly regardless of where the pressure is applied on push bar.

I Push bar is smoothly surfaced. Light force applied to the push bar can release the latch. Accessible version is also available to meet the 2010 ADA Standards and Accessible Design to operate the device with 5 lbs of force.

J Dogging can be done with an allen wrench, a small flat key or a flat blade screwdriver.

K Flush End Cap design.

L Option of 600 Series Pull Handle trim – new experience of door opening with no other products in the market can match.

General Overview

Device Material

1000 Series is furnished standard with grooved case. Smooth surface style is available. The two styles are mechanically and dimensionally identical and come with a wide selection of finishes.

Finishes

COLORANSI/BHMAUSB.E.G.A.D.C.F.H.
Polished Brass6053Brass, PolishedPlatedBuffed Anodized
Satin Brass6064Brass, SatinPlatedAnodized
Polished Bronze6119Bronze, PolishedPlatedBuffed Anodized
Satin Bronze61210Bronze, SatinPlatedAnodized
Dark Oxidized Satin Bronze61310BBronze, Satin; Dark OxidizedPlatedAnodized
Polished Chrome62526Brass, Polished & PlatedPlatedBuffed Anodized
Satin Chrome62626DBrass, Satin & PlatedPlatedAnodized
Satin Stainless Steel63032DSt. Steel, SatinPlatedAnodized

For other finishes consult factory.

 

Mechanism Case Options

Smooth
Grooved

Push Bar Trim Options:

  • Embossed “PUSH”
  • Braille, embossed “CAUTION STAIRWELL”
  • Red silk screen lettered “EMERGENCY EXIT ONLY – PUSH TO OPEN & SOUND ALARM”

Functions

ANSI/BHMA
Number
OperationsTrim Option 
200 Series
Thumbpiece
300 Series
Escutcheons
600 Series
Pull Handle
01Exit Only201NN
02Dummy Pull Only202302602
03Night Latch, Key Retracts Latchbolt203R/203MNN
05Key Locks or Unlocks Latchbolt205R/205MNN
07Inside / Outside Key Locks or Unlocks Latchbolt (Double Cylinder)205MNN
08Key Locks or Unlocks LatchboltN308R/308M
C308R/C308M
608R/608M
09Night Latch, Key Retracts LatchboltN309R/309M609R/609M
10Inside / Outside Key Locks or Unlocks Latchbolt (Double Cylinder)N308R/308M
C308R/C308M
N
14Lever / Knob Always Active, No CylinderN314R/314M/HL400614R/614M
15Thumbpiece Always Active, No Cylinder215R/215MNN

Note:

  1. Device functions are field selectable with the removal of drive screw in back of center case and determined by the type of trim adaption.
  2. The operation descriptions of the 600 Series trim is reference to the similar ANSI/BHMA function numbers.

Trim Operation Options

200 Series Thumbpiece Features

  • Trims are furnished with wrought plate and cast solid or forged grips.
  • Trims are designed to retrofit into other manufacturers’ devices.
  • Trims are UL/cUL certified for ANSI/BHMA A156.3-2014 Grade 1 and 3-Hour Fire Rated.
  • Trims are through bolted and covering 161 and 86 cutouts.(“GD” Grip furnished standard, unless specified).

300 Series Escutcheon Features

  • Escutcheon and lever with sleek and seamless design produced by casting or forging.
  • Trims are designed to retrofit into other manufacturers’ devices.
  • Trims are through bolted and covering 161 and 86 cutouts.
  • Handing field reversible.
  • Trims are UL/cUL certified for ANSI/BHMA A156.3-2014 Grade 1 and 3-Hour Fire Rated.
  • Specify lever or knob design. (“D” Lever furnished standard, unless specified).

Standard Operation

Model 308

Key Locks or Unlocks
Lever or Knob
(For 08/10 Functions)

Model 308 Trim is composed of heavy duty investment cast steel. An internal breakable cam breaks away when a predetermined load is applied to the outside lever handle in locked mode without damaging the trim or compromising security. The cam is easily replaceable with minimum efforts.The spring cassette and the breakable cam are replaceable parts.

Clutch Operation

Model C308

Key Locks or Unlocks
Lever or Knob
(For 08/10 Functions)

Model C308 Trim is designed to withstand abusive conditions. Working parts are made of heavy duty investment steel.When locked, the lever handle will turn freely and disengage from the center case of exit device. When an excessive force is applied on the lever handle, it will cause the breakable cam inside the trim to break at a predetermined load, protecting the trim from further damage.The spring cassette and the breakable cam are replaceable parts.

Handing:

Adjust direction of spring cassette and lever handle to switch handing.Trim: can switch between Rim (CD308R) and Mortise (CD308M) functions by changing the lift arm.

The lift arm:

 CD308M allows a small range of adjustment, making it easier for installation especially when it comes to dimension differences in door preparation.

600 Series Pull Handle

Pull Design Brings a New Style of Door Opening Experience

  • Get a more comfortable grip with its curved design and touch.
  • The slanted cylinder design allows face to face sight with the user.
  • An ergonomic grip handle that brings balance between functionality and aesthetics.
  • For application with existing Klacci 1000 Series Exit Devices.
  • Ease of installation. Same mounting screw hole positions designed to fit Klacci 1000 Series Exit Devices.
  • Non-handed.

Lever / Grip Options

Pull TrimEscutcheon

Strikes

  Panic Application
  Fire Application

 

  Rim Device
P/N. 106
Rim Strike
For Rim / SVR / 3PT top strike
P/N. 106Z
Rim Strike
For Rim / SVR / 3PT top strike
P/N. 108
Rim Strike
For double door Rim / 3PT
use with F170/F270 mullion
P/N. 136
Rim Strike
For double door Rim / SVR / CVR
combination with coordinator
  Vertical Rod Device 

Top Strike

Bottom Strike

Top Strike
For CVR
P/N. 227/227F
Bottom Strike
Furnished standard
for SVR / CVR / 3PT
P/N. 224
Bottom Strike
Optional for
SVR / 3PT
  Mortise Device
P/N. 336
Strikes
For use on 1-3/4″ (45mm) thick
double door with coordinator
and astragal.
P/N. 306
Strikes
Furnished standard for use
on 1-3/4″ (45mm) or 2-1/4″ (57mm)
single door and 2-1/4″ (57mm)
double door with coordinator.
  Shim 
P/N. 616819-010
For 106 Rim Strike
Two (2) pieces furnished standard
P/N. 616819-030
For 108 Rim Strike
Two (2) pieces furnished standard
P/N. 616819-050
For CVR top & bottom latches Strike
Sixteen (16) pieces furnished standard
for Top and Bottom latches. Eight (8)
pieces furnished standard for LBR

Double Cylinder with indicator – Handed

1100 Rim Device – Handed1400 Mortise Device – Handed

The Double Cylinder option is available on the Rim and Mortise Exit Devices. An indicator device installed on the inner side of door informs whether the outside trim is in a locked or unlocked state.

The outside key cylinder locks or unlocks the outside Trim. Specify Outside Trim with “07” or “10” function depending on trim options. When only the inside key cylinder is required to lock or unlock the outside trim and no outside cylinder operation is necessary for Rim Exit Device specify “08” (outside trim will be with blank mortise cylinder). For Mortise Exit Device specify “14” or “15” function depending on trim options.

Applications

DeviceCylinderTrim
Outside CylinderInside CylinderInside ThumbturnEscutcheonThumbpiece
CylinderCyl. Length (Part/No.)Door ThicknessCylinder Cam
Rim 1100/1105Standard1-1/4″ (441-103)
& 4240-0202
1-3/4″~2″
(45~50mm)
440-0710Rim Cylinder
(I/C / STD)
Tailpiece Length
3-1/8″ (79.6mm)
OK308R / C308RN/A
I/C1-3/8″ (442-701)
& 4240-0202
1-3/4″~2″
(45~50mm)
440-0711
Mortise 1400Standard1-1/2″ (441-105)1-3/4″~2″
(45~50mm)
440-0702308M205M / 215M
1-5/8″ (441-106)2″~2-1/4″
(50~57mm)
I/C1-1/2″ (442-702)1-3/4″~1-7/8″
(45~48mm)
440-0718
1-5/8″ (442-703)1-7/8″~2-1/8″
(48~54mm)
1-3/4″ (442-704)2-1/8″~2-1/4″
(54~57mm)

Note: Cylinder and thumbturn are not furnished standard. Specify when required.

 

Cylinder Cam


Extension Cam for
RIM Device Double Cylinder
(10 function).
Illustration
DimensionX=3/16″ (5mm)
Y=3/4″ (19mm)
X=3/16″ (5mm)
Y=3/4″ (19mm)
Cam No.440-0710440-0711

 

Options of keyed cylinder or thumbturn indicator unit

CylinderThumbturn

Cylinders

Cylinders are not furnished standard with the device or trim, specify when required. Schlage C keyway, 6-pin standard, available in 630 or 626 finish. Small Format Interchangeable Core combinated/uncombinated also available. Specify type and finish when ordering.

Cylinder TypeApplicationsTrimCylinderCyl. Length
(Part/No.)
Cylinder Cam
Mortise Cylinder
03* / 05* / 07* for
Mortise Device
200Standard1-1/4″ (441-103)440-0702
I/C1-3/8″ (442-701)440-0706
08 for
RIM/SVR/CVR*/3PT
300Standard1-1/8″ (441-102)440-0704
I/C1-3/8″ (442-701)440-0708
10 for RIM DeviceStandard1-1/8″ (441-102)440-0710
I/C1-3/8″ (442-701)440-0711
08 / 09 / 10 for
Mortise Device
Standard1-1/2″ (441-105)440-0702
I/C1-1/2″ (442-702)440-0706
Cylinder DoggingAll DeviceStandard1-1/4″ (441-103)440-0702
I/C1-3/8″ (442-701)440-0706
Rim Cylinder
03 / 05 for
RIM/SVR/CVR/3PT
200Standard / I/CTailpiece Length 3-1/8″ (79.6mm)
09 for
RIM/SVR/CVR/3PT
300
10 for
RIM/Mortise Device

* Must use with Cylinder Guard (Part/No. 4240-0202)

 

Cylinder Cam

Illustration
DimensionX=1/4″
(6mm)
Y=5/8″
(15mm)
X=3/8″
(9.5mm)
Y=3/4″
(19mm)
X=5/8″
(16.4mm)
Y=9/16″
(13.6mm)
X=3/16″
(4.4mm)
Y=7/16″
(11.9mm)
X=1/4″
(6mm)
Y=5/8″
(15mm)
X=3/8″
(9.5mm)
Y=3/4″
(19mm)
X=5/8″
(16.4mm)
Y=9/16″
(13.6mm)
X=3/16″
(4.4mm)
Y=7/16″
(11.9mm)
Cam No.440-0702440-0704440-0712440-0714440-0718440-0708440-0713440-0715

 

 

 

 

 

 

Cylinder Guard

4240-0202 / 4240-0203
For use on 203 / 205 / 207 Thumbpiece Trim.
CVR with 308R Escutcheon Trim and Mortise with C308R Escutcheon Trim require specialized cylinder guards.
4240-0203 is used for special door thickness applications. For specification details, please contact our sales representative.

 

I/C Core
“A” keyway standard supplied. Specify 6 or 7 pin, combinated or uncombinated and finish 606 or 626 when ordering. Consult factory for other keyways.

Dogging

 LD

 CD

 HKD

 ED(ELR)

Less Dogging


Less Dogging is available in all 1000 Series panic exit devices.

Cylinder Dogging


Available for all models except for fire exit hardware. Cylinder dogging provides the ability to lock down the push bar with a key cylinder, allowing the door to be used in both push/pull mode. To order, specify “CD”. Requires the use of a 1-1/4″ (31.75mm) mortise cylinder (not furnished standard).

Flat/Hex Key Dogging

Electrical Dogging

Mullions

 Removable mullions are used with paired doors where
a full width opening is only occasionally required. Doors
are fitted with Rim Exit Devices and normally function
as single doors. Available in 7′, 8′
or 10′ (2134mm, 2438mm or 3048mm) lengths.

Model 170 / F170
Keyed Removable Mullion

Top and Bottom Fittings:

Investment cast steel, furnished with steel anchors for floors.

Mullion:

2″ x 3″ (609mm x 915mm) steel.

Stock size:

8′ (2438mm) length standard, can be cut for opening less than 8′ (2438mm).
10′ (3048mm) length available upon request.

Finishes:
600, 689, 695.

UL Listed:

Listed for 3-Hour Fire Rated Exit Hardware.

Cylinder:

Not furnished standard, keying is standard 1-1/8″ (28.5mm) Mortise Cylinder with cam.
Specify with or without strikes when ordering.

The head design of 170/F170:

Provides a secure, quick and easy means of removal. The Mullion can be installed and locked without using key.

Model 270 / F270
Non-Keyed Removable Mullion

Top and Bottom Fittings:

Investment cast steel, furnished with steel anchors for floors.

Mullion:

2″ x 3″ (609mm x 915mm) steel.

Stock size:

8′ (2438mm) length standard, can be cut for opening less than 8′ (2438mm).
10′ (3048mm) length available upon request.

Finishes:
600, 689, 695.

UL Listed:

Listed for 3-Hour Fire Rated Exit Hardware.
Specify with or without strikes when ordering.

 

Miscellaneous

 

Top Rod

IllustrationDevice No.Part No.Rod LengthFor Door Height
 1200
1500
(SVR/3PT)
616823-02036-1/8″ (916mm)7′
616823-03048-1/8″ (1221mm)8′
616823-030
Add
616823-040*
48-1/8″ (1221mm)
Add
24″ (609mm)
10′
 1300
(CVR)
616823-07037″ (940mm)7′
616823-08049″ (1245mm)8′
616823-080
Add
616823-050*
49″ (1245mm)
Add
23-7/8″ (605mm)
10′

* Extension Rod

Bottom Rod

For Push Bar location at 39-5/8″(1006 mm) from finished floor.

IllustrationDevice No.Part No.Rod Length
 1200
1500
(SVR/3PT)
616823-01031-7/8″ (807mm)
 1300
(CVR)
2468230091034-9/32″ (870mm)

 

Dummy Push Bar

DP3 / DP4 Inactive

  • A push/pull operation can be accomplished by using an outside dummy trim.
  • Size: 3′ or 4′ (914 mm or 1219 mm).
  • Finishes: 605, 606, 611,612, 613, 625, 626, 630.

 

Portable Displaymount

Note: Please contact sales representative for more details.

 

Light Duty Option

PD 420/PD 430

  • Size: 24″ × 7-3/8″ × 8″ (600 mm × 190 mm × 205 mm).
  • Weight: 1.7 lb (0.8 kg).

 

 

Heavy Duty Option

PD 620/640

  • PD 620 for 1100/1105 Rim exit device.
  • PD 640 for 1400 Mortise Lock Exit Devices.
  • Size: 35-1/2″ x 14″ x 24-1/2″ (900 mm x 350 mm x 620 mm).
  • Weight: 11 lb (5 kg).

PD 730/750

  • PD 730 for 1200/1500 Surface Vertical Rods.
  • PD 750 for 1300 Concealed Vertical Rods.
  • Size: 35-1/2″ x 14″ x 28-3/4″ (900 mm x 350 mm x 730 mm).
  • Weight: 13 lb (6 kg).
  • Note: Size and weight exclude device.

Door Coordinators

   Learn More   

Electrical

  • Klacci ANSI Grade 1 1000 Series Electrical Exit Devices

   Learn More   

Fire Door Applications and Listings

F1000 Series Fire Exit Devices
Maximum Door Opening Applications and Listings

Exit
Device
Door
Meterial
Single DoorDouble Door    
With 170
mullion
With 270
mullion
VR/VR
Same Direction
VR/Mortise
Same Direction
VR/VR
Double Egress
F1100
F1105
RIM
Metal3 Hour
4′ x 8′
3 Hour
8′ x 8′
3 Hour
8′ x 8′
F1200
SVR
Metal3 Hour
4′ x 10′
3 Hour
8′ x 10′
3 Hour
8′ x 10′
3 Hour
8′ x 10′
F1200
LBR
Metal3 Hour
4′ x 10′
3 Hour
8′ x 10′
3 Hour
8′ x 10′
F1300
CVR
Metal3 Hour
4′ x 10′
3 Hour
8′ x 10′
3 Hour
8′ x 10′
3 Hour
8′ x 10′
F1300
LBR
Metal3 Hour
4′ x 10′
3 Hour
8′ x 10′
3 Hour
8′ x 10′
F1400
MORTAISE
Metal3 Hour
4′ x 10′
3 Hour
8′ x 10′
F1500
3PT
Metal3 Hour
4′ x 8′
3 Hour
8′ x 8′
3 Hour
8′ x 8′

4′ (1219mm), 8′ (2438mm), 10′ (3048mm)

Notes:

  1. Fire Exit Device conforms to UL10C and UBC7-2.
  2. Fire Exit Device is applicable for wood door with 1-1/2 Hour or 1/3 Hour rating.
  3. Consult with door manufacturer for specific limitations on Fire Door Assemblies.

Typical Installation

Single Door

  Rim Exit Device / Vertical Rod Exit Devices
PanicRIM1100Up to 4′ x 10′ Door Size
1105
SVR1200
CVR1300
3PT1500
Fire (3 Hour)RIMF1100Up to 4′ x 8′ Door Size
F1105
SVRF1200Up to 4′ x 10′ Door Size
CVRF1300
3PTF1500Up to 4′ x 8′ Door Size
  Mortise Lock Exit Devices
PanicMortise1400Up to 4′ x 10′ Door Size
Fire (3 Hour)MortiseF1400

Double Egress Opening

  Two Surface Vertical Rod Devices
PanicSVR x SVR1200 x 1200Up to 8′ x 10′ Door Size
Fire (3 Hour)SVR x SVRF1200 x F1200
  Two Concealed Vertical Rod Devices
PanicCVR x CVR1300 x 1300Up to 8′ x 10′ Door Size
Fire (3 Hour)CVR x CVRF1300 x F1300

Double Egress Opening Less Bottom Rod

  Two Surface Vertical Rod Devices Less Bottom Rod
PanicSVR x SVR1200LBR x 1200LBRUp to 8′ x 10′ Door Size
Fire (3 Hour)SVR x SVRF1200LBR x F1200LBR
  Two Concealed Vertical Rod Devices Less Bottom Rod
PanicCVR x CVR1300LBR x 1300LBRUp to 8′ x 10′ Door Size
Fire (3 Hour)CVR x CVRF1300LBR x F1300LBR
Note: Fire Rated Door with Auxiliary Fire Bolt.

Two Rim Exit Devices with Removable Mullion, Same Direction

  Two Rim Exit Devices with Removable Mullion
PanicRIM x RIM1100 x 1100Up to 8′ x 10′ Door Size
1105 x 1105
Fire (3 Hour)RIM x RIMF1100 x F1100Up to 8′ x 8′ Door Size’
F1105 x F1105
  Two Three-Point Latching Devices with Removable Mullion
Panic3PT x 3PT1500 x 1500Up to 8′ x 10′ Door Size
Fire (3 Hour)3PT x 3PTF1500 x F1500Up to 8′ x 8′ Door Size’
Note: With 170 Keyed / 270 Non-Keyed Removable Mullion.

Two Vertical Rod Devices, Same Direction Less Bottom Rod

(Do not use overlapping astragal)

  Surface Vertical Rod Devices Less Bottom Rod
PanicSVR x SVR1200LBR x 1200LBRUp to 8′ x 10′ Door Size
Fire (3 Hour)SVR x SVRF1200LBR x F1200LBR
  Concealed Vertical Rod Devices Less Bottom Rod
PanicCVR x CVR1300LBR x 1300LBRUp to 8′ x 10′ Door Size
Fire (3 Hour)CVR x CVRF1300LBR x F1300LBR
Note: Fire Rated Door with Auxiliary Fire Bolt.

Two Vertical Rod Devices, Same Direction
(Do not use overlapping astragal)

  Two Surface Vertical Rod Devices
PanicSVR x SVR1200 x 1200Up to 8′ x 10′ Door Size
Fire (3 Hour)SVR x SVRF1200 x F1200
  Two Concealed Vertical Rod Devices
PanicCVR x CVR1300 x 1300Up to 8′ x 10′ Door Size
Fire (3 Hour)CVR x CVRF1300 x F1300

Vertical Rod Devices/ RIM Exit Devices, Same Direction

  One Rim Exit Device x One Vertical Rod Device
PanicRIM x SVR1100 x 1200Up to 8′ x 10′ Door Size
1105 x 1200
RIM x CVR1100 x 1300
1104 x 1300
Fire (3 Hour)RIM x SVRF1100 x F1200
F1105 x F1200
RIM x CVRF1100 x F1300
F1105 x F1300
  One Mortise Lock Exit Device x One Vertical Rod Device
PanicMortise x SVR1400 x 1200Up to 8′ x 10′ Door Size
Mortise x CVR1400 x 1300
Fire (3 Hour)Mortise x SVRF1400 x F1200
Mortise x CVRF1400 x F1300

Download

Headquarters and Operation Office

I-TEK Metal Manufacturing Co., Ltd.

Global Office

KLACCI Inc.

BHMA, UL, Intertek
Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

Copyright© 2019 – I-TEK Metal Manufacturing. All rights reserved.