1400 / F1400 Mortise Lock Exit Devices (Mortise)

1400 / F1400 Mortise Lock Exit Devices (Mortise)

ANSI Grade 1 Heavy Duty

Klacci 1400 / F1400 Mortise Lock Exit Devices (Mortise)
ApplicationsOffices, schools, banks, assisted living facilities and other institutions or commercial buildings.
Certification / CompliancePanic devices UL/cUL listed for UL305 and ANSI/BHMA A156.3-2014 Grade 1 Panic Hardware.
UL/cUL Fire rated for 3-hour Fire Exit Hardware, conforms to UL10C and UBC7-2. Also complies with NFPA 80 Fire doors and windows.
Exit devices, levers, trims and pulls comply with American Disability Act (ADA) and NFPA 101 life safety code.
Doors & PreparationsFor new or retrofit installation into other manufacturers’ devices.
For maximum door opening applications and listings for fire exit devices.
– Mullion
– Door Thickness1-3/4″ (45mm) ~ 2-1/4″ (57mm). Consult factory for other door thickness.
– Door Wide3′ (914mm)(standard) ~ 4′ (1219mm).
– Door High(Panic)7′ (2134mm)(standard) ~ 10′ (3048mm).
(Fire)7′ (2134mm)(standard) ~ 8′ (2438mm).
– Device Centerline from Finished Floor39-5/8″ (1006mm).
– Door Undercut1/4″ (6mm).
Center CaseLatch bolt of mortise case can be adjusted for full retraction by Adjustment Finger with fine tuning of adjustment screw in center case.
Top & Bottom Latch Case
Center Case LatchboltStainless Steel, deadlocking, 3/4″ (19mm) throw.
Top Latchbolt
Bottom Latchbolt
Fire Bolt
Electrical FunctionsCan be interfaced with building security systems:
– AL Alarm Exit
– DE Delayed Egress Device
– ELR Electric Latch Retraction
– LM Latchbolt Monitoring
– RX Request to Exit
– SS Signal Switch
– E Electric Mortise Lock
DoggingNOT available on fire exit hardware.
Flat/hex key dogging standard.
Dogging options available for LD, CD.
Strikes
– Panic
— Top
— Middle306
— Bottom
– Fire
— Top
— Middle306
— Bottom
CylindersNOT furnished standard, specify when required.
TrimThe device and trim are sold separately, easy to mix and match.
HandingTrim field reversible.
Device non-handed.
Except for double cylinder option. For double cylinder, specify handing when required.
FastenersMachine screws and wood screws are furnished standard.
Sex Bolts (SNB)Required when used with wood, composite or non-reinforced hollow metal doors.

Download

Contact us