POシリーズドアオペレーター

The Touchless Solution

COVID-19 had changed the way how people interact with each other. The touchless solution integrates a variety of door hardware to minimize the touch points needed to access the door, promoting wellness and convenience to all.

MOTION

THERMAL

INFRARED

Lightweight and Heavy Duty

Weight less but works on 100lbs to 250lbs doors.

Energy Saving

DC inverter motor provides a more energy efficient choice.

Modular Design

Actuator, back plate, controller and most other parts are modular designed that makes installation a simplicity.

Simple Setup

Easy to setup and adjust through mobile device’s app interface.

Optional Devices

Capable for connecting with external inhibit devices such as motion sensor, thermal sensor and infrared sensor to transform the door into a touchless opening control.

Simple Setup

Klacci POシリーズドアオペレーター mobile device’s app set up

The open position, backcheck position, latch position and all other operation parameters are easily set up through the user friendly mobile device’s app interface.*

* Please consult factory for availability

Modular Design

Actuator and controller are modularly designed to install directly on the back plate without complex assembly process. The plug-and-go power source make the door operator ready to use after installation.

Push arm

Hold Open Mode	Opens and holds the door in full open with the option for a preset period of time or until power is turned off.
Ventilation Mode	Door opens automatically when triggered by alarm system for air or smoke flow until signal is ceased.
Emergency Relay	Overrides all existing activation and keep the door closed until the emergency signal is ceased.
Latch Assist Mode	Pulls in the door to assist the lock’s latch engagement when the Door Operator is at closed position.
Obstruction Mode	Door stops when it detects obstruction when opening or closing.
Open Delay Mode	Delay opening of the door when it is needed by the door lock hardware.
Disable Push Button	Outside push button is disabled when activated.
Power Close Mode	Light amount of power is applied to assist the closing when the door is between 10° and 0° position.
Obstruction Detector	Detects obstruction presence for when the Door Operator is at open or closed position.
Push Open Mode	The operator opens the door to full-open position when manual push force is detected on the door.
Mode Selector	On – Allows signal inputs Off – Disables all signal inputs except Ventilation Mode Hold Open Mode – Opens and Holds the door in full open.
Vestibule Delay Mode	First door and second door opens in sequential order with second door in delay. Delay time of the second door is adjustable.
Door Closer Mode	Works as a door closer when electric power is turned off.