1000 Series Exit Devices and Trims are designed for new or retrofit installation into other manufacturers’ devices. Push Bar assembly’s smooth and reduced projection minimizes catch hazard. Device function is field selectable by adaptation with selected type of trim. A full complement of lever trim is available in wide range of architectural finishes.
The ANSI/BHMA A156.3-2014 Grade 1
Inherits from the excellent quality and performance of Klacci, the 1000 Series exit device is certified to meet ANSI/UL305 and the ANSI/BHMA A156.3-2014 Grade 1 cycle test requirement. Other than the already rigorous testing standard, the latch needs to withstand a 20 lbs weight loading to it in the cycle test to make sure it stays latched during any viciousness attempts. Devices and trims are also UL/cUL listed for panic hardware or fire-rated hardware. 1000 Series provides superior durability for high impact applications such as offices, schools, banks, assisted living facilities and other institutions or commercial buildings.
Security At-a-glance Classroom Security Solutions
Indicators provide the most direct visual assistance of the locked/unlocked status of the door during emergency events. The indicator window and message is designed to have status of the lock able to be seen clearly distance away within the inside of the room.
Now the 1000 Series Exit Device comes with the available indicator option on double keyed devices. Verifying the locked/unlocked status of critical main entrances or exits can be peace of mind.
The 1000 Series Exit Devices are fabricated and blended with simplicity, strength, durability, aesthetics and installer-friendly innovations.
Devices and trims are designed for new or retrofit installation into other manufacturers’ exit devices and trims.
Made to comply with the highest safety and security standards in industry.
UL/cUL listed for panic hardware or 3-hour fire rated exit hardware.
Certified to ANSI/UL305 and ANSI/BHMA A156.3-2014 Grade 1.
A Simple cylinder built in add-on kit.
B Special plastic inserts and rubber bumpers reduce noise and don’t fail under high or low temperatures. Impervious to petroleum lubricants.
C Detachable center case allows switching between mechanical and electrical options which replaces the need of buying two complete sets.
D Replaceable cam breaks at a predetermined load to prevent further damage of the trim mechanism. Handing change is simple and easy, just remove screw and cam from mechanism and rotate lever to desired position, then replace cam and fasten the screw.
E Stainless steel latch and deadlatching blade add perceived value.
F Center case with maximum versatility, Surface and concealed vertical rods can be adjusted inside the center case with an ingenious rod holder design.
G Double cylinder with indicator devices are used as classroom intruder locks, allowing the locking of the outside trim without opening the door.
H Integrated end cap reduced projection minimizes catch hazard and add stability to the push bar to move smoothly regardless of where the pressure is applied on push bar.
IPush bar is smoothly surfaced. Light force applied to the push bar can release the latch. Accessible version is also available to meet the 2010 ADA Standards and Accessible Design to operate the device with 5 lbs of force.
J Dogging can be done with an allen wrench, a small flat key or a flat blade screwdriver.
K Flush End Cap design.
L Option of 600 Series Pull Handle trim – new experience of door opening with no other products in the market can match.
General Overview
Device Material
1000 Series is furnished standard with grooved case. Smooth surface style is available. The two styles are mechanically and dimensionally identical and come with a wide selection of finishes.
Finishes
COLOR
ANSI/BHMA
US
B.E.G.
A.D.
C.F.H.
Polished Brass
605
3
Brass, Polished
Plated
Buffed Anodized
Satin Brass
606
4
Brass, Satin
Plated
Anodized
Polished Bronze
611
9
Bronze, Polished
Plated
Buffed Anodized
Satin Bronze
612
10
Bronze, Satin
Plated
Anodized
Dark Oxidized Satin Bronze
613
10B
Bronze, Satin; Dark Oxidized
Plated
Anodized
Polished Chrome
625
26
Brass, Polished & Plated
Plated
Buffed Anodized
Satin Chrome
626
26D
Brass, Satin & Plated
Plated
Anodized
Satin Stainless Steel
630
32D
St. Steel, Satin
Plated
Anodized
For other finishes consult factory.
Mechanism Case Options
Smooth
Grooved
Push Bar Trim Options:
Embossed “PUSH”
Braille, embossed “CAUTION STAIRWELL”
Red silk screen lettered “EMERGENCY EXIT ONLY – PUSH TO OPEN & SOUND ALARM”
Functions
ANSI/BHMA
Number
Operations
Trim Option
200 Series
Thumbpiece
300 Series
Escutcheons
600 Series
Pull Handle
01
Exit Only
201
N
N
02
Dummy Pull Only
202
302
602
03
Night Latch, Key Retracts Latchbolt
203R/203M
N
N
05
Key Locks or Unlocks Latchbolt
205R/205M
N
N
07
Inside / Outside Key Locks or Unlocks Latchbolt (Double Cylinder)
205M
N
N
08
Key Locks or Unlocks Latchbolt
N
308R/308M
C308R/C308M
608R/608M
09
Night Latch, Key Retracts Latchbolt
N
309R/309M
609R/609M
10
Inside / Outside Key Locks or Unlocks Latchbolt (Double Cylinder)
N
308R/308M
C308R/C308M
N
14
Lever / Knob Always Active, No Cylinder
N
314R/314M/HL400
614R/614M
15
Thumbpiece Always Active, No Cylinder
215R/215M
N
N
Note:
Device functions are field selectable with the removal of drive screw in back of center case and determined by the type of trim adaption.
The operation descriptions of the 600 Series trim is reference to the similar ANSI/BHMA function numbers.
Trim Operation Options
200 Series Thumbpiece Features
Trims are furnished with wrought plate and cast solid or forged grips.
Trims are designed to retrofit into other manufacturers’ devices.
Trims are UL/cUL certified for ANSI/BHMA A156.3-2014 Grade 1 and 3-Hour Fire Rated.
Trims are through bolted and covering 161 and 86 cutouts.(“GD” Grip furnished standard, unless specified).
300 Series Escutcheon Features
Escutcheon and lever with sleek and seamless design produced by casting or forging.
Trims are designed to retrofit into other manufacturers’ devices.
Trims are through bolted and covering 161 and 86 cutouts.
Handing field reversible.
Trims are UL/cUL certified for ANSI/BHMA A156.3-2014 Grade 1 and 3-Hour Fire Rated.
Specify lever or knob design. (“D” Lever furnished standard, unless specified).
Standard Operation
Model 308
Key Locks or Unlocks Lever or Knob (For 08/10 Functions)
Model 308 Trim is composed of heavy duty investment cast steel. An internal breakable cam breaks away when a predetermined load is applied to the outside lever handle in locked mode without damaging the trim or compromising security. The cam is easily replaceable with minimum efforts.The spring cassette and the breakable cam are replaceable parts.
Clutch Operation
Model C308
Key Locks or Unlocks Lever or Knob (For 08/10 Functions)
Model C308 Trim is designed to withstand abusive conditions. Working parts are made of heavy duty investment steel.When locked, the lever handle will turn freely and disengage from the center case of exit device. When an excessive force is applied on the lever handle, it will cause the breakable cam inside the trim to break at a predetermined load, protecting the trim from further damage.The spring cassette and the breakable cam are replaceable parts.
Handing:
Adjust direction of spring cassette and lever handle to switch handing.Trim: can switch between Rim (CD308R) and Mortise (CD308M) functions by changing the lift arm.
The lift arm:
CD308M allows a small range of adjustment, making it easier for installation especially when it comes to dimension differences in door preparation.
600 Series Pull Handle
Pull Design Brings a New Style of Door Opening Experience
Get a more comfortable grip with its curved design and touch.
The slanted cylinder design allows face to face sight with the user.
An ergonomic grip handle that brings balance between functionality and aesthetics.
For application with existing Klacci 1000 Series Exit Devices.
Ease of installation. Same mounting screw hole positions designed to fit Klacci 1000 Series Exit Devices.
Non-handed.
Lever / Grip Options
Pull Trim
Escutcheon
Strikes
Panic Application
Fire Application
Rim Device
P/N. 106 Rim Strike
For Rim / SVR / 3PT top strike
P/N. 106Z Rim Strike
For Rim / SVR / 3PT top strike
P/N. 108 Rim Strike
For double door Rim / 3PT
use with F170/F270 mullion
P/N. 136 Rim Strike
For double door Rim / SVR / CVR
combination with coordinator
Vertical Rod Device
Top Strike
Bottom Strike
Top Strike
For CVR
P/N. 227/227F Bottom Strike
Furnished standard
for SVR / CVR / 3PT
P/N. 224 Bottom Strike
Optional for
SVR / 3PT
Mortise Device
P/N. 336 Strikes
For use on 1-3/4″ (45mm) thick
double door with coordinator
and astragal.
P/N. 306 Strikes
Furnished standard for use
on 1-3/4″ (45mm) or 2-1/4″ (57mm)
single door and 2-1/4″ (57mm)
double door with coordinator.
Shim
P/N. 616819-010
For 106 Rim Strike
Two (2) pieces furnished standard
P/N. 616819-030
For 108 Rim Strike
Two (2) pieces furnished standard
P/N. 616819-050
For CVR top & bottom latches Strike
Sixteen (16) pieces furnished standard
for Top and Bottom latches. Eight (8)
pieces furnished standard for LBR
Double Cylinder with indicator – Handed
1100 Rim Device – Handed
1400 Mortise Device – Handed
The Double Cylinder option is available on the Rim and Mortise Exit Devices. An indicator device installed on the inner side of door informs whether the outside trim is in a locked or unlocked state.
The outside key cylinder locks or unlocks the outside Trim. Specify Outside Trim with “07” or “10” function depending on trim options. When only the inside key cylinder is required to lock or unlock the outside trim and no outside cylinder operation is necessary for Rim Exit Device specify “08” (outside trim will be with blank mortise cylinder). For Mortise Exit Device specify “14” or “15” function depending on trim options.
Applications
Device
Cylinder
Trim
Outside Cylinder
Inside Cylinder
Inside Thumbturn
Escutcheon
Thumbpiece
Cylinder
Cyl. Length (Part/No.)
Door Thickness
Cylinder Cam
Rim 1100/1105
Standard
1-1/4″ (441-103)
& 4240-0202
1-3/4″~2″
(45~50mm)
440-0710
Rim Cylinder
(I/C / STD)
Tailpiece Length
3-1/8″ (79.6mm)
OK
308R / C308R
N/A
I/C
1-3/8″ (442-701)
& 4240-0202
1-3/4″~2″
(45~50mm)
440-0711
Mortise 1400
Standard
1-1/2″ (441-105)
1-3/4″~2″
(45~50mm)
440-0702
308M
205M / 215M
1-5/8″ (441-106)
2″~2-1/4″
(50~57mm)
I/C
1-1/2″ (442-702)
1-3/4″~1-7/8″
(45~48mm)
440-0718
1-5/8″ (442-703)
1-7/8″~2-1/8″
(48~54mm)
1-3/4″ (442-704)
2-1/8″~2-1/4″
(54~57mm)
Note: Cylinder and thumbturn are not furnished standard. Specify when required.
Cylinder Cam
Extension Cam for
RIM Device Double Cylinder
(10 function).
Illustration
Dimension
X=3/16″ (5mm)
Y=3/4″ (19mm)
X=3/16″ (5mm)
Y=3/4″ (19mm)
Cam No.
440-0710
440-0711
Options of keyed cylinder or thumbturn indicator unit
Cylinder
Thumbturn
Cylinders
Cylinders are not furnished standard with the device or trim, specify when required. Schlage C keyway, 6-pin standard, available in 630 or 626 finish. Small Format Interchangeable Core combinated/uncombinated also available. Specify type and finish when ordering.
Cylinder Type
Applications
Trim
Cylinder
Cyl. Length
(Part/No.)
Cylinder Cam
Mortise Cylinder
03* / 05* / 07* for
Mortise Device
200
Standard
1-1/4″ (441-103)
440-0702
I/C
1-3/8″ (442-701)
440-0706
08 for
RIM/SVR/CVR*/3PT
300
Standard
1-1/8″ (441-102)
440-0704
I/C
1-3/8″ (442-701)
440-0708
10 for RIM Device
Standard
1-1/8″ (441-102)
440-0710
I/C
1-3/8″ (442-701)
440-0711
08 / 09 / 10 for
Mortise Device
Standard
1-1/2″ (441-105)
440-0702
I/C
1-1/2″ (442-702)
440-0706
Cylinder Dogging
All Device
Standard
1-1/4″ (441-103)
440-0702
I/C
1-3/8″ (442-701)
440-0706
Rim Cylinder
03 / 05 for
RIM/SVR/CVR/3PT
200
Standard / I/C
Tailpiece Length 3-1/8″ (79.6mm)
09 for
RIM/SVR/CVR/3PT
300
10 for
RIM/Mortise Device
* Must use with Cylinder Guard (Part/No. 4240-0202)
Cylinder Cam
Illustration
Dimension
X=1/4″
(6mm)
Y=5/8″
(15mm)
X=3/8″
(9.5mm)
Y=3/4″
(19mm)
X=5/8″
(16.4mm)
Y=9/16″
(13.6mm)
X=3/16″
(4.4mm)
Y=7/16″
(11.9mm)
X=1/4″
(6mm)
Y=5/8″
(15mm)
X=3/8″
(9.5mm)
Y=3/4″
(19mm)
X=5/8″
(16.4mm)
Y=9/16″
(13.6mm)
X=3/16″
(4.4mm)
Y=7/16″
(11.9mm)
Cam No.
440-0702
440-0704
440-0712
440-0714
440-0718
440-0708
440-0713
440-0715
Cylinder Guard
4240-0202 / 4240-0203 For use on 203 / 205 / 207 Thumbpiece Trim. CVR with 308R Escutcheon Trim and Mortise with C308R Escutcheon Trim require specialized cylinder guards. 4240-0203 is used for special door thickness applications. For specification details, please contact our sales representative.
I/C Core “A” keyway standard supplied. Specify 6 or 7 pin, combinated or uncombinated and finish 606 or 626 when ordering. Consult factory for other keyways.
Dogging
LD
CD
HKD
ED(ELR)
Less Dogging
Less Dogging is available in all 1000 Series panic exit devices.
Cylinder Dogging
Available for all models except for fire exit hardware. Cylinder dogging provides the ability to lock down the push bar with a key cylinder, allowing the door to be used in both push/pull mode. To order, specify “CD”. Requires the use of a 1-1/4″ (31.75mm) mortise cylinder (not furnished standard).
Flat/Hex Key Dogging
Electrical Dogging
Mullions
Removable mullions are used with paired doors where
a full width opening is only occasionally required. Doors
are fitted with Rim Exit Devices and normally function
as single doors. Available in 7′, 8′
or 10′ (2134mm, 2438mm or 3048mm) lengths.
Model 170 / F170 Keyed Removable Mullion
Top and Bottom Fittings:
Investment cast steel, furnished with steel anchors for floors.
Mullion:
2″ x 3″ (609mm x 915mm) steel.
Stock size:
8′ (2438mm) length standard, can be cut for opening less than 8′ (2438mm).
10′ (3048mm) length available upon request.
Finishes:
600, 689, 695.
UL Listed:
Listed for 3-Hour Fire Rated Exit Hardware.
Cylinder:
Not furnished standard, keying is standard 1-1/8″ (28.5mm) Mortise Cylinder with cam.
Specify with or without strikes when ordering.
The head design of 170/F170:
Provides a secure, quick and easy means of removal. The Mullion can be installed and locked without using key.
Model 270 / F270 Non-Keyed Removable Mullion
Top and Bottom Fittings:
Investment cast steel, furnished with steel anchors for floors.
Mullion:
2″ x 3″ (609mm x 915mm) steel.
Stock size:
8′ (2438mm) length standard, can be cut for opening less than 8′ (2438mm).
10′ (3048mm) length available upon request.
Finishes:
600, 689, 695.
UL Listed:
Listed for 3-Hour Fire Rated Exit Hardware.
Specify with or without strikes when ordering.
Miscellaneous
Top Rod
Illustration
Device No.
Part No.
Rod Length
For Door Height
1200
1500
(SVR/3PT)
616823-020
36-1/8″ (916mm)
7′
616823-030
48-1/8″ (1221mm)
8′
616823-030
Add
616823-040*
48-1/8″ (1221mm)
Add
24″ (609mm)
10′
1300
(CVR)
616823-070
37″ (940mm)
7′
616823-080
49″ (1245mm)
8′
616823-080
Add
616823-050*
49″ (1245mm)
Add
23-7/8″ (605mm)
10′
* Extension Rod
Bottom Rod
For Push Bar location at 39-5/8″(1006 mm) from finished floor.
Illustration
Device No.
Part No.
Rod Length
1200
1500
(SVR/3PT)
616823-010
31-7/8″ (807mm)
1300
(CVR)
24682300910
34-9/32″ (870mm)
Dummy Push Bar
DP3 / DP4 Inactive
A push/pull operation can be accomplished by using an outside dummy trim.
Size: 3′ or 4′ (914 mm or 1219 mm).
Finishes: 605, 606, 611,612, 613, 625, 626, 630.
Portable Displaymount
Note: Please contact sales representative for more details.
Light Duty Option
PD 420/PD 430
Size: 24″ × 7-3/8″ × 8″ (600 mm × 190 mm × 205 mm).
Weight: 1.7 lb (0.8 kg).
Heavy Duty Option
PD 620/640
PD 620 for 1100/1105 Rim exit device.
PD 640 for 1400 Mortise Lock Exit Devices.
Size: 35-1/2″ x 14″ x 24-1/2″ (900 mm x 350 mm x 620 mm).
Weight: 11 lb (5 kg).
PD 730/750
PD 730 for 1200/1500 Surface Vertical Rods.
PD 750 for 1300 Concealed Vertical Rods.
Size: 35-1/2″ x 14″ x 28-3/4″ (900 mm x 350 mm x 730 mm).
Removable mullions are used with paired doors where
