Klacci HL9000 Push/Pull Trim sickroom

HL9000 Push/Pull Trim

for Mortise Locks

ANSI Grade 1 Specialty Hardware

Klacci HL9000 Push/Pull Trim
Klacci HL9000 Push/Pull Trim with Cylinder
Klacci HL9000 Push/Pull Trim with thumbturn
  • For application on Mortise Escutcheon and Mortise Sectional Locks.
  • Conforms to ANSI/BHMA A156.13 Grade 1.
  • UL Listed for 3-Hour fire rating.
  • Ease of installation. Perfect door prep with same mounting screw hole positions that match those of the mortise lock case.
  • Wide range of functions available to choose from.
  • Narrow and wide Escutcheon plate sizes plate available, conforms to ANSI A115.1.
Certification / Compliance
  • ANSI/BHMA A156.13 Grade 1.

  • UL Listed for 3-Hour fire rating.
Doors & Preparations
  • Conforms to ANSI A115.1.
Case Size
  • 4-5/16″ x 6″ x 1″ (110mm x 152mm x 25mm).
Backset
  • 2-3/4″ (70 mm) (used with M Series Mortise Locks).
Door Range
  • 1-3/4″ (45 mm)~2-1/2″ (64 mm).
Spacing
  • 3-5/8″ (92 mm) center cylinder to spindle. 2-2/16″ (62 mm) center thumbturn to spindle.
Deadbolt
  • 1″ (25mm) throw, stainless steel.
Latchbolt
  • 3/4″ (19mm) throw, with anti-friction tongue, all stainless steel.
Trim Handing
  • Non-handed.
Case Handing
  • Field reversible without removing case.
Spindles
  • Breakable to prevent the lock case from unlocking or being damaged.
Klacci HL Series Pull Trim Dimensions
Pull Trim
Klacci HL400 Series Escutcheon Plate Dimensions
Escutcheon Plate

We offer a full and complete line of spacer rings, cylinder guards and spring washers, as well as a wide selection of cam types to fulfill the requirements of most applications. Standard mortise cylinders are furnished in 5 or 6 pin configurations. Interchangeable core mortise cylinders are also available in 6 or 7 pin configurations, where increased security is achieved by quick change of keying.

IllustrationFaceLength
1-1/8″1-1/4″1-3/8″1-1/2″1-1/2″1-3/4″1-7/8″
Klacci Mortise Lock Cylinder Full-face StandardFull-face
Standard		441-102441-103441-103441-103441-106441-106441-108
Klacci Mortise Lock Cylinder Concealed StandardConcealed
Standard		441-402441-403441-404441-405441-406441-407441-408
Klacci Mortise Lock Cylinder Full-face Interchangeable coreFull-face
I/C Core		N/A442-601442-701442-702N/AN/AN/A
Klacci Mortise Lock Cylinder Concealed Interchangeable coreConcealed
I/C Core		N/A442-601442-601442-902N/AN/AN/A

Additional cams are available for our mortise cylinder to operate in other manufacturers’ mortise locks.

Klacci ANSI Grade 1 Mortise Lock Cylinder Cam 440-0702Klacci ANSI Grade 1 Mortise Lock Cylinder Cam 440-0703Klacci ANSI Grade 1 Mortise Lock Cylinder Cam 440-0704Klacci ANSI Grade 1 Mortise Lock Cylinder Cam 440-0801Klacci ANSI Grade 1 Mortise Lock Cylinder Cam 440-0705Klacci ANSI Grade 1 Mortise Lock Cylinder Cam 440-0706Klacci ANSI Grade 1 Mortise Lock Cylinder Cam 440-0708Klacci ANSI Grade 1 Mortise Lock Cylinder Cam 440-0709
440-0702440-0703440-0704440-0801440-0705440-0706440-0708440-0709

We offer two types of cylinder guards to work with sectional trim for different door ranges and various cylinder lengths. Specify part number when ordering.

  • Klacci ANSI Grade 1 Mortise Lock Cylinder Guard 4240-0201
    4240-0201
  • Klacci ANSI Grade 1 Mortise Lock Cylinder Guard 4240-0202
    4240-0202
Klacci Mortise Lock Armor Front (Faceplates) Square Corner

Square Corner

Klacci Mortise Lock Armor Front (Faceplates) Square Corner

1/4″ Radius Corner

Square Corner1/4″ Radius CornerDescription
1-1/4″
(32mm)
width		1-1/16″
(27mm)
width		1-1/4″
(32mm)
width		1-1/16″
(27mm)
width
528-711528-731528-721528-741Latch × Aux. Latch × Deadbolt
528-712528-732528-722528-742Latch × Aux. Latch
528-713528-733528-723528-743Latch × Deadbolt
528-714528-734528-724528-744Latch
528-715528-735528-725528-745Blank
528-716528-736528-726528-746Deadbolt

Non-handed, made of brass, bronze or stainless steel. Available with square corner or 1/4″ radius corner.

Klacci Mortise Lock Strikes 527-611 Square Corner

527-611

Square Corner

Klacci Mortise Lock Strikes 527-611 Square Corner

527-631

1/4″ Radius Corner

Klacci Mortise Lock Strikes 527-611 Square Corner

527-610

Square Corner

Klacci Mortise Lock Strikes 527-611 Square Corner

527-630

1/4″ Radius Corner

Dust box is made of steel, provided at no additional cost.

Klacci Mortise Lock Strikes 527-611 Square Corner

552-312

Dust box

Function Code NumberDescription ANSI/BHMA
Without deadbolt
Function Code NumberDescription ANSI/BHMA
With deadbolt
Function Code NumberDescription ANSI/BHMA
Without deadbolt
Function Code NumberDescription ANSI/BHMA
With deadbolt

A wide selection of finishes are available to match with your door and other hardware.

ColorANSI/BHMAUS
Klacci finishes 605 Polished BrassPolished Brass6053
Klacci finishes 606 Satin BrassSatin Brass6063
Klacci finishes 611 Polished BronzePolished Bronze6119
Klacci finishes 612 Satin BronzeSatin Bronze61210
Klacci finishes 613 Dark Oxidized Satin BronzeDark Oxidized Satin Bronze61310B
Klacci finishes 625 Polished ChromePolished Chrome62526
Klacci finishes 626 Satin ChromeSatin Chrome62626D
Klacci finishes 630 Satin Stainless SteelSatin Stainless Steel63032D

Download

Klacci HL Series Push/Pull Trim Catalog

Klacci HL Series Push/Pull Trim Catalog
2.42 MB

Download
Contact us

HL Series Product Options​